Bahama Pure | Installation Options

Installation Options

There is a choice of mobile or permanent installation options. Mobile installation is characterized by a greater degree of flexibility in choosing the location and surface. When installing an in-ground option, building measures must be carried out that have to be taken into consideration during the planning phase. They consist of above-ground and in-ground pieces to be set in concrete.

Portable Stand


Steel frame For 8 standard flagstones 500 x 500 x 50 mm (not included in the price)


Size of cross-frame: approx. 1130 x 1130 mm


Weight of cross-frame: approx. 28 kg


Optional

Powder-coating in anthracite grey | RAL 7016, textured matte finish


Height adjustable in all 4 corners


8 standard flagstones 500 x 500 x 50 mm required for all umbrellas


Stahlkassetten Rahmen für mobile Bodenbefestigung von Bahama Sonnenschirmen.
Stahlkassetten Rahmen für Bahama Sonnenschirme

Steel Plate Base with 4 or 8 Steel Plates | 2 Layers


Flat construction with only 15 mm installation height; no tripping hazard


Screw-on connecting components (receiving sleeve) with tilting hinge, powder-coated in anthracite gray RAL 7016, textured matte finish


Plate size: 490 x 490 x 15 mm (ea. 28 kg)


Screw-on connecting components (receiving sleeve) with tilting hinge, powder-coated in anthracite gray RAL 7016, textured matte finish


Plate size: 490 x 490 x 15 mm (ea. 28 kg)


Wind warranty only in connection with 2-layered steel plate base (8 steel plates)


Umbrella height and table clearance increase by 3 cm with a 1-layered steel plate base and by 4.5 cm with a 2-layered steel plate base


Optional

Spacer (e.g. for terrace substructures), starting at 89 mm. Measurements don‘t include the steel plate height nor the 8 mm thick winter cover, which has to be taken into consideration for flush-mounting


Stahlplattenständer für mobile Bodenbefestigung von Bahama Sonnenschirmen.
Stahlplattenständer für mobile Bodenbefestigung von Bahama Sonnenschirmen.

In-Ground Tipping Base


Lower part to be set in concrete


Screw-on connecting components (receiving sleeve) with tilting hinge, powder-coated in anthracite gray RAL 7016, textured matte finish


Weight: approx. 3.4 kg


The 8 mm thick winter cover has to be taken into consideration for flush-mounting


Optional

Spacer for Tipping Base for bridging a gap e.g. installation in a kindergarten sandbox; height order based starting at min. 89 mm to 392 mm (special sizeson request) Measurements don‘t include the steel plate height nor the 8 mm thick winter cover, which has to be taken into consideration for flush-mounting


Bodenverankerung für Bahama Sonnenschirme

Surface Mount


Size: 350 x 350 x 15 mm


hot-dip galvanized


Screw-on connecting components (receiving sleeve) with tilting hinge, powder-coated in anthracite gray RAL 7016, textured matte finish


Especially suited for bolting onto massive concrete surfaces


Weight: approx. 14.2 kg


Powder-coating in anthracite grey | RAL 7016, textured matte finish


Optional

»fischer« heavy-duty anchoring bolts (1 set =4 pcs.); type #FH II 15/15 SK A4; M10 thread; incl. concrete drill type #SDS Plus II, drill depth 105 mm and Allen wrench SW 6


Multi-use flange plate | for 3 or 4 screws


Size: 260 x 260 x 23 mm


Weight: 9.7 kg (includes the winter cover)


Galvanized multi-use flange plate | adaption for In-Ground Tipping Base


For in-ground bases with 3 or 4 screws, with M10 or M12 screw connection, e.g. for Event or third-party footing devices


incl. winter cover


Galvanized multi-use flange plate (20 mm) with stainless steel lid (3 mm)


Connecting components not included in the supply scope


Adapter Platte Bahama Jumbrella Bodenbefestigung.
Adapter Platte Bahama Jumbrella Bodenbefestigung.

Find a local distributor now!